There’s nothing more disappointing than heading out to your hot tub for a nice hot soak in the warm, bubbly water only to find that your jets just aren’t working. You turn on your hot tub and nothing happens and you begin to wonder what the heck is going on. In most cases, it’s simply a problem with the spa blower.
Now while that might sound like a major repair, they are actually fairly simple devices and are connected in virtually the same way on all major hot tubs. While you can always call a plumber or hot tub repair technician to your home to do it for you, you can often perform these repairs fairly easily yourself, saving a bucket of money in the process.
What Is a Spa Blower?
Before you embark on a this hot tub repair, it’s helpful to know at least a little bit about how the blower works. It’s a pretty simple unit, consisting of a fan motor and a housing.
Rather than repair a spa air blower, it’s recommended that you actually just replace the entire assembly instead of trying to fix the motor as you won’t see a major cost savings by doing so, and the repair can often be much more complicated than simply replacing it.
A hot tub blower can be either 110V or 220V, depending on the type of hot tub you have. When purchasing a replacement part, make sure you buy the one that matches your hot tub and its electrical requirements.
Spa blowers are usually plumbed in one of two ways. In one type, the air from the blower runs to a manifold and is then distributed to smaller air lines that run to the injector jet fittings. In the other, a channel cavity is adhered to the shell of your hot tub, which has holes drilled in it to allow the air to pass to the water.
A Word of Warning about Spa Air Blowers
Peanut butter and chocolate. The Captain and Tennille. Rama lama lama ka dinga da dinga dong. Lots of things go together. But two things that absolutely do not go together are water and electricity.
Hot tub air blower repair or replacement means you’ll be working with both of them. If you’re not confident you can do that safely, please call a professional technician.
If you do believe you can do it, you must take a few safety precautions first.
Make sure you cut all electricity to the hot tub before you even begin to remove the covers. Turn off the circuit breakers, unplug any plugs from their outlets, and then double check to make sure there is absolutely no power running to your hot tub before you begin.
Tired of trying to keep your hot tub clean all the time and dealing with chemicals?
You'll save $100 right away with this easy-to-follow digital ebook and video course. This is the ultimate maintenance guide that hot tub manufacturer doesn’t provide you.
Click Here to Learn More
How to Replace a Hot Tub Blower
Have your elbow grease at the ready!
Disconnect the Electricity
Yup, we already said it once, but it bears repeating. Your safety is of the utmost importance. Disconnect everything.
Locate and Disconnect the Faulty Spa Air Blower
You can do this in just a few simple steps:
- Open the hot tub’s equipment panel.
- Locate the blower assembly.
- Disconnect the air duct hose from the exhaust port.
- Unplug the blower’s electrical cables.
- Disconnect the grounding wire if your hot tub has one.
- Remove any mounting bolts.
- Double check the voltage requirements by looking at the label on the old blower to make sure you have an appropriate replacement.
Install the New Spa Air Blower
The installation is basically the reverse process of removing the old blower.
- Place the new blower in exactly the same position as the old one.
- Reconnect the mounting bolts to hold it in place.
- If your new blower has a grounding wire, connect it.
- Plug the electrical cables in.
- Connect the air duct hose.
- Close the equipment panel.
- Pat yourself on the back—you did it!
Turn on the Electricity and Test
Plug everything back in, and turn the power to your hot tub back on. Test your new spa blower by turning on your hot tub. Allow it to run for a few minutes in order to make sure everything is running smoothly.
You Get a Spa Blower! And You Get a Spa Blower!
You see now why simply replacing the hot tub blower is less work than trying to repair the motor, right? In just a few short minutes, you can restore your hot tub back to working order.
Just remember, while this is a relatively simple repair, if you don’t feel comfortable doing it yourself, there’s nothing wrong with contacting a licensed technician to do it for you. Either way, you’ll be able to get back to enjoying your hot tub the way it was meant to be.
Happy Soaking!
Recommended Guides
Find out what you need to do to troubleshoot a misbehaving hot tub high limit switch so you can go back to soaking safely.
Hot tub troubleshooting on your own can save you big bucks on simple hot tub repairs, plus let you know when to step back and call a pro.
Is your hot tub tripping the breaker? Could be a fluke. Or it could be one of these seven things. Identifying the problem is the key to fixing it.