A Cheat Sheet For Perfectly Balanced Pool Water and Crystal Clear Swimming
Download this FREE printable cheat sheet to keep your pool clean and clear without any fuss. You’ll never worry about your pool again with this easy-to-use guide.
Click Here For The FREE Cheat Sheet

Pool Flocculant: How Does It Work and Is It Better Than Pool Clarifier?

By Matt Giovanisci | Updated: January 13, 2022

If you’ve got cloudy pool water and you want to clear it up fast, pool flocculant can help. It’s fast and effective at clearing up cloudy water. But it won’t work in every cloudy pool situation. So when should you use flocculant? And when should you use a clarifier instead?

Here’s a quick guide on the difference between flocculant and clarifier and how to use flocculant to clear cloudy water. You can watch the quick video below. Or keep reading for the complete pool flocculant tutorial.

What is Pool Flocculant?

Pool flocculant, also known as pool floc, clumps together the tiny particles in your pool that cause cloudy water. Once those particles have coagulated, the larger clumps sink to the bottom of your swimming pool where they’re vacuumed out.

Here’s the pool flocculant that we recommend:

Our Top Pick
Fast Floc by Swim University

A fast-acting formula that drops cloudy water particles to the bottom of the pool so you can vacuum it out. Fast Floc will help you remove dead algae and non-living organic contaminants from your pool fast.

It's safe for all pools and filters including inground, above ground, concrete, plaster, fiberglass, vinyl liner, and more.

Buy Now From Swim University
If you click this link and make a purchase, we earn a commission at no additional cost to you.

What’s the Difference Between Pool Clarifier and Pool Flocculant?

Pool flocculant coagulates small particles into larger clumps that sink to the bottom of the pool. Floc is faster and more effective than a clarifier, but it requires more work and must be manually removed with a pool vacuum. Pool clarifier, on the other hand, coagulates particles into smaller clumps that are removed by the pool filter. It’s easier to use than floc, but it’s not as powerful and generally takes longer to clear up your pool water.

Pool Clarifier vs Pool Flocculant

What Are the Benefits of Pool Flocculant?

In many cloudy water situations, pool flocculant is an effective option for clearing up your pool:

  • Pool flocculant works quickly. Unlike clarifier, you won’t have to wait days for flocculant to do its job. The particles quickly coagulate together and sink to your pool floor in a matter of hours.
  • Pool flocculant is very effective. Flocculant keeps particles clumped together until you remove them with a vacuum. No stragglers are left behind causing cloudy spots in your swimming pool water.
  • Pool flocculant works well with sand filters and diatomaceous earth or DE filters. Those filters have multiport valves that include a “Waste” setting. And that means it’s easy to bypass the filter when vacuuming out the clumped particles and flocculant.

What Are the Downsides of Pool Flocculant?

Before you opt for a pool flocculant over a pool clarifier, there are a few reasons why it might not be ideal:

  • Pool flocculant requires more work. Once the clumps form on the bottom of the pool, you’ll need to remove them with a manual pool vacuum. An automatic pool vacuum will not work.
  • You’ll lose pool water using pool flocculant. When you vacuum the clumps out, you’ll need to vacuum on the “waste” setting and bypass the filter. All of that water will leave your pool and your water level will drop.
  • You can’t use pool flocculant with a cartridge filter. Unless you have a custom plumbing setup that allows you to bypass the filter when you vacuum, you won’t be able to use pool flocculant with a cartridge filter system.

By the way, If you want to learn how to never want to deal with cloudy water again, check out our pool maintenance video course! It’s a step-by-step guide to show you how to prevent pool problems before they get out of hand.

Frustrated by adding chemicals and trying to keep your pool clear all the time?

We cut out all the confusion of pool maintenance in this easy-to-read illustrated ebook and video course. It'll help you save $100 right away on pool care!

Click Here to Learn More
The Pool Care Handbook

How Long Does it Take for Pool Flocculant to Work?

Pool flocculant can clear up your cloudy pool water in 1 or 2 days. Though it works faster than pool clarifiers, it will need 8 to 16 hours to clump together the particles before you can vacuum. Add flocculant to your pool with your filter on “recirculate.” Then let the flocculant sit overnight with your pool pump off. Once it has settled to the bottom of your pool, use a manual vacuum to remove all of the coagulated particles.

How To Use Pool Flocculant

Before you use pool flocculant, make sure your pool filter has a “waste” setting. Remember, the coagulated particles cannot be removed by your filter, so you must be able to bypass your filter and vacuum the water out of your pool.

1. Set Filter to Recirculate

Turn your sand filter or DE filter multiport valve to “recirculate.” Do not allow pool flocculant to get into your filter. It’ll block everything up, rendering your filter useless until you replace the filter medium altogether.

2. Balance pH

Your pH should be between 7.4 and 7.6 before adding pool floc. Test your water levels. Then, adjust your pH with a pH increaser or pH decreaser.

3. Add Flocculant (Floc) to Pool Water

Add the correct amount of flocculant based on your size pool. If you need help figuring out your pool’s volume, you can use a pool calculator to help you. Be sure to read the manufacturer’s instructions before adding any chemical to your water.

Here’s our recommendation for a pool flocculant:

Our Top Pick
Fast Floc by Swim University

A fast-acting formula that drops cloudy water particles to the bottom of the pool so you can vacuum it out. Fast Floc will help you remove dead algae and non-living organic contaminants from your pool fast.

It's safe for all pools and filters including inground, above ground, concrete, plaster, fiberglass, vinyl liner, and more.

Buy Now From Swim University
If you click this link and make a purchase, we earn a commission at no additional cost to you.

4. Circulate the Flocculant

Run the pool pump for two hours to circulate the floc throughout the water. Remember to keep your filter set to “recirculate,” not “filter.”

5. Let Pool Flocculant Sit for 8 Hours

Turn off your pump and allow the pool to sit for at least eight hours. This is easiest to do overnight. If you have an automatic timer set on your system, remember to turn it off.

6. Vacuum Particle Clumps Out of Pool

Set your pool filter to ”Waste” and connect your manual vacuum. If you don’t have a multiport valve, open your filter’s drain port and let the water drain out as you vacuum. And if you need help vacuuming your pool, be sure to check out our guide on How To Use A Manual Pool Vacuum.

As you vacuum the particle clumps from the bottom of your pool, the movement may stir up the particles and cloud your pool again. If this happens, take a break, allow the particles to settle, then begin vacuuming again. Try to move slowly. And you may need to vacuum two or three times to remove all the clumps.

7. Check Pool’s Water Level

If your water level has gone down (it likely will), use a garden hose with a filter to add fresh, clear water and bring the level back up where it needs to be. You can also keep the hose in the pool while you’re vacuuming, though this may also stir up the particles.

8. Test and Balance Water

Because you’ve removed and replaced water in your pool, you’ll need to rebalance your water chemistry. Test your pool water and adjust your Alkalinity and pH. Once those levels are balanced, add chlorine. Be sure to run your filter system normally when rebalancing your water.

Should You Use Flocculant or Clarifier?

If you want to quickly clear up your cloudy water (like for a pool party) or if you’ve got a really cloudy pool, use pool flocculant. Even though the vacuuming takes more work, floc works more effectively at clumping together particles. Just make sure you have the ability to bypass your filter when vacuuming water out of your pool.

If your pool is just a little cloudy, opt for the pool clarifier. You can use this in any situation with any filter setup. It’s just not as powerful as floc.

Frequently Asked Questions About Pool Flocculant

Looking for more help using pool floc? Here are some common questions and answers.

Can you swim in cloudy pool water?

No, you shouldn’t swim in cloudy pool water. A cloudy pool is full of contaminants that can cause eye irritation. There’s also an increased risk of drowning since visibility is limited. Avoid swimming in your pool until the water is cleared up.

When should I add Flocculant to my pool water?

If you have cloudy water but your water chemistry is balanced (pH, alkalinity, and chlorine levels) and your filters are clean, add pool flocculant. It’s also helpful to add floc after a rainstorm when debris and dirty water enter your pool or if you have early-stage algae growth. Because pool flocculant needs 8 to 16 hours to work in your water, it’s most helpful to add it at dusk and let it sit overnight.

Can you use Flocculant and Algaecide together?

Like any chemical, you should never add algaecide and pool flocculant at the same time to your pool water. But pool flocculant is useful at fighting the early stages of algae growth. It helps bind floating algae particles, making it easier to vacuum them out of your pool.

Can I use Aluminum Sulfate as a Pool Flocculant?

Yes, you can Aluminum Sulfate, also known as Alum Floc, as a pool flocculant. Look for food-grade, garden-grade or technical-grade Aluminum Sulfate. Depending on the condition of your pool, you’ll want to use around 4 lbs of Alum per 10,000 gallons of water. It works just like a packaged pool flocculant, so be sure your water chemistry is balanced before adding it, and be sure to vacuum to waste.

Can you use too much Pool Flocculant?

Yes! Using too much pool flocculant can actually make your pool water even more cloudy. Just like any other pool chemical, be sure to follow the manufacturer’s instructions and add the appropriate amount based on your pool’s volume.

If you end up constantly needing to use pool flocculant or clarifier, check that you clean or backwash your filtration system regularly. And be sure to keep your pH levels balanced. If you need more help with water chemistry, be sure to check out our Basic Pool Chemistry 101 guide.

Need More Pool Maintenance Help?

Matt Giovanisci is the founder of Swim University® and has been in the pool and spa industry since 1995. Since then, his mission is to make pool and hot tub care easy for everyone. And each year, he continues to help more people with water chemistry, cleaning, and troubleshooting.
A Cheat Sheet For Perfectly Balanced Pool Water and Crystal Clear Swimming
Download this FREE printable cheat sheet to keep your pool clean and clear without any fuss. You’ll never worry about your pool again with this easy-to-use guide.
Click Here For The FREE Cheat Sheet